ICTP 2011 Proceedings Material Characterization and Modelling

Back to front page

All links below direct to .pdf files – if you do not have Adobe Reader installed on your computer, you can download it here

C. Pradille, Y. Chastel, M. Bellet
Thermo-Mechanical Tests Combining Thermal, Mechanical and Physical Measurements

J.Y. Min, J.P. Lin, L.J. Xin, Y. Ye, K. Chen, L. Ding
Investigation on the Instability Process of Q&P Steel during Uniaxial Tensile Test Using Digital Image Correlation

R.B. Song, Y.P. Li, K. Zhang
Flow Stress and Microstructure Evolution of 321 Stainless Steel during Hot Compressing

M. Wildau, T. Labudde, W. Bleck
Investigation on strain hardening behavior of metastable austenitic stainless steels

T. Yoshida, S. Yoshida
Applications of Quick Response Internet Simulation to Plasticity Processing Systems with Ultrasonic Vibration

W. Volk, I. Heinle, H. Grass
Accurate Determination of Plastic Yield Curves and Interpolation Point for Plastic Yield Locus with the Bulge Test

A. Del Prete, G. Papadia, A. Spagnolo
Computer Aided Engineering for a Warm Bulging Test Tooling Design

D. Huttel, P. Post, S. Schnabel, P. Groche
The Stress Strain Behaviour of Paperboard in Tensile and Bulge Test

A. Canpolat, J. Gerlach, L. Kessler, A.E. Tekkaya
Aspects for a Calibration of Yield Locus Models with Biaxial Cruciform Tests

D. Brands, J. Schröder, D. Balzani
On the Incorporation of Microstructural Information in Dual Phase Steel Simulations

A. Borowikow, D. Wehage, N. Biba
Simulation of Thermo-Mechanical Treatment in Industrial Manufacturing Processes

C. Wu, H. Yang, H.W. Li, X.G. Fan
Numerical Simulation of Dynamic Recrystallization of Duplex Titanium Alloy by Coupling Cellular Automata Method with Finite Element Analysis

M. Schaper, G. Gershteyn, T. Clausmeyer, N. Shevchenko, S. Bargmann, Fr.-W. Bach
Correlation between Morphology of Dislocation Structures and Macroscopic Loadings

L.A. Reyes, P.J. Paramo, M.P. Guerrero-Mata, M. de la Garza, V. Páramo, J. Calvo, J.M. Cabrera
Microstructural Modeling and Thermomechanical Analysis of an IN718 Superalloy During a Forging Process

K. Jöchen, T. Böhlke
Preprocessing of Texture Data for an Efficient Use in Homogenization Schemes

M. Imoto, T. Sakai, H. Utsunomiya
Effects of Deformation Route on Recrystallization Behavior of Copper Sheet

A.I.Z. Farahat
Thermomechanical Processing of Fe-6.9Al-2Cr-0.88C Steel: Intercritical Annealing followed by Quench Tempering

W.C. Xu, Y. Chen, C.X. Wang, D.B. Shan, B. Guo
Comparative Study on the Evolution of Microstructure and Mechanical Property of TA 15 Alloy between between Plane Compression and Power Spinning

T. Murakami, E. Kakiuchi, Y. Honda, T. Arikawa, H. Kakimoto, T. Choda, H. Hatano
Strengthening and Functionally Grading of V Added Ferrite-Pearlite Hot Forging Steel Parts

S.H. Zhang, G.S. Song, L.Q. Ruan
Analysis on the Micro-mechanism of Warm Deformation of AZ31 Mg Alloy

D. Simek, D. Rafaja, M. Motylenko, C. Ullrich, V. Klemm, G. Lehmann, A. Oswald, R. Schmidtchen
Prediction of the Strength of the Ferritic-pearlitic Steels by means of X-Ray Diffraction

Q.H. Han, Y.L. Kang, X.M. Zhao, C. Lu
Effect of Cooling Rate on the Microstructure and Deformation Characteristics of Coldrolled C-Si-Mn DP980-DP1180 Steels

J. Calvo, J.M. Cabrera, M.P. Guerrero-Mata, M. de la Garza, J.F. Puigjaner
Characterization of the Hot Deformation Behaviour of Nimonic 80A and 263 Ni-based Superalloys

T. Hoffmann, A. Bertram, J.Z. Tischler, B.C. Larson
Crystal Plasticity Model Validation by Single-Grain Indentation Tests

A. Saai, I. Westermann, S. Dumoulin, O.S. Hopperstad, T. Berstad
Influence of Microstructure and Texture on the Bendability of AA7108 Aluminium Alloy

H. Li, Z. Jiang, D. Wei, J. Han
Crystal Plasticity Finite Element Modelling of Surface Roughness and Texture of Metals

R. Hino, A. Hirahara, Y. Fujii, F. Yoshida
Forming Limit of High-strength Steel Sheets under Non-proportional Deformation

F. Zhalehfar, S.J. Hosseinipour, S. Nourouzi, A.H. Gorji
The Influence of Strain Path Change on Forming Limit Diagram of AA5083

U.N.S. Rohith, N.V. Reddy, P.M. Dixit
A Bilinear Strain Path Approach for the Prediction of Forming Limit Curves under Complex Loading Paths

B. Sanay, B. Kaftanoglu
Prediction of Plastic Instability and Forming Limits in Sheet Metal Forming

J.M.A. César de Sá, P. Teixeira, F.M. Andrade Pires, A.D. Santos
Failure Criterion for Prediction of Sheet Metal Forming Limits

A. Ghiotti, S. Bruschi
Formability of Aluminium Alloy Sheets at Elevated Temperatures

S.M. Hosseini, S.J. Hosseinipour, S. Nourouzi, A.H. Gorji
Effect of Age Hardening on the Formability of 6063 Aluminium Alloy

B.-A. Behrens, A. Bouguecha, M. Vucetic, I. Peshekhodov
Determination of the Johnson-Cook Fracture Model Parameters for Sheet Metal Based on the Uniaxial Tensile Test, Bulge Test, and a Modified Miyauchi Shear Test

Y.S. Lou, H. Huh, G.H. Bae, S.B. Kim, Y.K. Ko
Limit Dome Height Prediction Based on a New Ductile Fracture Criterion

T. Ishiguro, S. Hiramatsu, Y. Yoshida, N. Yukawa, T. Ishikawa, H. Yoshida, N. Fujita
Effect of Martensite Volume Fraction on Ductility of Dual Phase Steel

A. Haufe, M. Feucht, F. Neukamm, P. DuBois
A Model to predict Damage and Failure for UHS in Forming and Crashworthiness Applications

J. He, J. Liu, Z. Cui, L. Ruan
A Criterion of Ductile Fracture for Structural Steel at High Temperature